Linear Actuator for Cabinet Doors and Lift-Up Panels

A compact linear actuator can automate a lift-up cabinet door, storage panel, equipment cover, or small adjustable surface. These projects are usually more sensitive to mounting space, alignment, noise, and pinch points than to maximum actuator force.

Where U1 fits the application

The HyHaven HH-LA-U1 can be a starting point for a light, guided cabinet door or panel when the calculated force and required travel fit the product specifications. A lower-force actuator may help avoid oversized hardware, but the correct choice still depends on the hinge geometry and resistance.

If the panel is heavier, the linkage is unfavorable, or the movement has higher resistance, review the HH-LA-U2 only after checking the force requirement. Do not choose a model just because it has a higher headline rating.

Measure the closed and open positions

• Distance between actuator mounting points when closed
• Distance between mounting points when open
• Panel opening angle and hinge location
• Available clearance for the motor body and rod
• Required speed and operating frequency

The panel should be guided by its hinges, slides, or support structure. The actuator should not carry unintended side load or act as the only support for the panel.

Safety and user access

Lift-up panels can create pinch points. Add mechanical stops, keep hands clear during testing, and consider what happens if power is lost. Confirm that the selected switch or controller is appropriate for the actuator and that users can access the panel safely.

Indoor installation and protection

U1 and U2 are listed with IP54 protection, but indoor installation does not remove the need to protect cable connections from spills, cleaning fluid, and impact. Route wiring away from hinges and moving joints.

Practical selection rule

Use U1 as the first screening option for a light, compact, well-guided panel. Consider U2 only when the measured mechanism needs more force. Confirm stroke, mounting length, voltage, duty cycle, and availability on the product page before purchase.

View HH-LA-U1 or view HH-LA-U2.

For a cabinet panel, calculate force and travel through the complete hinge path, then verify mounting points, installation clearance, loaded speed, duty cycle, and control.

Ready to Build Yours?

Adding a lift-up cabinet door or pop-up shelf? Light force is what you want. The HH-LA-U1 gives you 900N in 12V/24V for $62.99, and its matching angled brackets are $12.99. See them here: HH-LA-U1, angled brackets. Send us a photo of your cabinet on WhatsApp and we will help you place the mounting points.