CE Certification for Linear Actuators: How to Tell a Real Certificate from a Printed Logo
A CE logo costs nothing to print. Any seller can drop the two letters into a product photo in thirty seconds, and many do. A certificate is different: it is a document, issued by a named certification body, with a number you can check, a list of models it applies to, and dates that say when it was registered and when it expires. If you are buying electric linear actuators for a product, a project or resale, learning to tell the two apart takes about two minutes — and it is the difference between a claim and evidence.
What CE marking actually is
CE is the European Union's conformity framework. For electrical equipment, the manufacturer (or importer) declares that the product meets the requirements of the applicable EU directives, and the CE mark is the visible sign of that declaration. For our linear actuators, the conformity attestation lists two directives:
- 2014/35/EU — the Low Voltage Directive (LVD), covering electrical safety.
- 2014/30/EU — the Electromagnetic Compatibility Directive (EMC), covering the electromagnetic emissions and immunity of the equipment.
A declaration on its own is just paper, though. What gives it weight is the testing behind it: an independent certification body tests the product against the harmonised standards named for those directives, keeps a test report on file, and issues an attestation that ties the whole package together.
What a verifiable attestation contains
Here is our own, so you can see exactly what to look for. HyHaven's U-series linear actuators are covered by an Attestation of Conformity issued by UDEM International Certification (Ankara, Türkiye):
- Certificate number: M.2023.206.C84513
- Test report number: ZBB0723040401013
- Standards applied: EN 60204-1:2018 (electrical safety of machinery), EN 61000-3-2:2019 and EN 61000-3-3:2013+A1:2019 (EMC emission limits)
- Registered: 24 April 2023 · Valid until: 23 April 2028
- Models covered: manufacturer models JS-TGZ-U1 through JS-TGZ-U12 — sold on this store as the U1, U2, U3, U5, U6, U11, U7 and U8
Every element of that list is a checkpoint. A certificate number and report number can be quoted to the issuing body — UDEM allows validity checks through its website, www.udem.com.tr. The model list tells you whether the specific actuator you are buying is actually covered, or whether the seller is showing you a certificate for a different product. The dates tell you whether it is still in force. The full document, exactly as issued, is published on our Certifications page.
How to check any seller's CE claim in two minutes
- Ask for the document, not the logo. A seller with a real certificate can show it. If all you ever see is a CE mark in a listing photo, there may be nothing behind it.
- Find the certificate number and the issuing body. No number, no body, no way to verify — treat the claim as unproven.
- Read the model list. Certificates name exact model numbers. "Similar product, same factory" is not coverage. Check that the model on the certificate matches the model in the listing, character for character.
- Check the dates. Attestations are registered for a fixed period. An expired certificate is a historical document, not a current claim.
- Verify with the issuer when it matters. For a single actuator this is optional diligence. For a resale or OEM order it is cheap insurance: quote the certificate number to the issuing body and confirm it answers.
What ours does not cover — stated plainly
The attestation above covers the U-series actuators listed on it, and nothing else we sell. The HH-370 and HH-31ZY worm gear motors and the controller kits are not on this certificate, and we make no CE claim for them. Our custom fastener line carries no product certifications. The attestation also speaks only to the directives and standards named on it — it is not, for example, a RoHS certificate, and we do not present it as one.
We publish the exclusions alongside the claim because that is what makes the claim worth anything: a seller who tells you exactly where a certificate stops is a seller whose paperwork you can trust where it starts.
FAQ
Does a CE attestation mean the EU tested the product?
No. Testing is carried out by a certification body against the standards named on the attestation, and the attestation is the record of that testing. The checkpoints above — issuing body, certificate and report numbers, model list, validity — are how you confirm the record exists.
Is the exact model I am buying covered?
If you are buying a U1, U2, U3, U5, U6, U11, U7 or U8 from this store, yes — those store models correspond to the JS-TGZ-U1 to U12 manufacturer models named on the certificate. Our model comparison table shows the full U-series side by side.
The motor I want is not covered. Is that a problem?
It simply means we sell it without a CE claim. Many applications do not require one; if yours does — for example, a finished product you will place on the EU market — choose a covered U-series actuator instead, or ask us at support@hyhavenstore.com before ordering and we will tell you exactly what documentation exists for the part you are considering.
Can I get a copy of the certificate for my records?
Yes. The document is on the Certifications page, and if you need it for an OEM or resale file, email us and we will send the same document we publish — nothing redrafted, nothing retyped.
More detail on documentation and ordering is on our FAQ page, and the certificate itself is always one click away on the Certifications page.