1 4

HyHaven HH-LC-01 Electric Lifting Column | 2500 N | 24V DC | IP65

Model number HH-LC-01

  • Force2,500 N / 562 lbf
  • Voltage 24V DC
  • No-load Speed
  • Load Speed 4 mm/s at 2,500 N load
  • IP Rating IP65
$159.99 USD
$159.99 USD
Sale Sold out
Air shipping to the United States, Belgium, Germany, Spain, France, Italy, and the Netherlands. Orders under US$59: US$10 shipping. Orders of US$59 or more: free air shipping. Estimated delivery: 5–8 business days after shipment; timing may vary by destination. Shipping details
Shipping to a remote or island address? Check delivery coverage by postal code before ordering.

Some remote postal codes and island destinations—including Alaska and Hawaii, the Canary Islands, and certain French overseas regions—may have different delivery availability or timing. Before ordering, contact us with your full ZIP or postal code so we can confirm whether our air-shipping route serves your address and the total shipping cost. We will not add any extra shipping charge without your approval. If we cannot serve your address, we will contact you before dispatch to arrange a solution or refund.

Stroke + Voltage
Stroke + Voltage
Request a Quote

The HH-LC-01 is a telescopic electric lifting column from Zhiheng Drive. Its nested sections raise and lower desks, TV lifts, workbenches and treatment tables smoothly at 4 mm/s under a full 2,500 N load, and the...

Read more technical details

Technical Specifications

  • Force 2,500 N / 562 lbf
  • Voltage 24V DC
  • No-load Speed
  • Load Speed 4 mm/s at 2,500 N load
  • Stroke Length 100-450 mm (factory range to 500 mm)
  • IP Rating IP65
  • Limit Switch Built-in

The HH-LC-01 is a telescopic electric lifting column from Zhiheng Drive. Its nested sections raise and lower desks, TV lifts, workbenches and treatment tables smoothly at 4 mm/s under a full 2,500 N load, and the IP65-sealed housing shrugs off dust and water jets.

Sold configuration: 24V DC, in the five stocked stroke lengths from 100 to 450 mm. The factory range runs to 500 mm — message us for 500 mm or a complete desk or lift frame set.

Specification

  • Max push force: 2,500 N
  • Max pull force: 2,500 N
  • Load speed: 4 mm/s at full load
  • Voltage: 24V DC
  • Stroke: 100–450 mm stocked (factory range 100–500 mm)
  • Installation length: Stroke + 150 mm
  • Limit switches: Built-in
  • Base plate: 180 × 180 mm, 4 × Ø6.5 mm holes on a 160 mm pitch
  • Duty cycle: S2-10MIN (max 10 minutes continuous operation)
  • Protection: IP65
  • Operating temperature: -26°C to +65°C
  • Colors: Grey-white
  • Control: Requires a compatible 24V DC control box and handset (sold separately)
  • Warranty: 12 months
View full details
From $159.99 Request a quote

PRODUCT HIGHLIGHTS

Built around the needs of your project

  • 2,500 N Lift Force

    Rated 2,500 N in both directions — headroom for heavy desktops, equipment and platforms

  • Telescopic Column Design

    A low retracted height with a long, stable lift — the geometry desks and TV lifts need

  • Sealed IP65 Housing

    Dust-tight and water-jet resistant for workshops, clinics and sheltered outdoor use

  • Five Lengths, One Standard

    Stocked strokes from 100 to 450 mm cover most lift projects without custom lead times

  • Part of a System

    Add a Zhiheng control box and handset to build the complete lift — one supplier, matched parts

LC-01 highlights

HyHaven HH-LC-01 Electric Lifting Column | 2500 N | 24V DC | IP65

2,500 N / 562 lbf

Force

Applications

Where this actuator can be used

01

Standing desks

02

TV lifts

03

Height-adjustable workbenches

04

Medical treatment tables

05

Industrial workstations

06

Display and podium lifts

Technical details buyers can scan quickly

Specifications

Technical details buyers can scan quickly

Verified product-specific values are shown below.

Force 2,500 N / 562 lbf 2,500 N / 562 lbf
Voltage 24V DC
Stroke 100-450 mm (factory range to 500 mm)
No-load Speed
Load Speed 4 mm/s at 2,500 N load
IP Rating IP65
Limit Switch Built-in

Technical documents

Technical Documents & Resources

Access product information, installation references, and technical files for your actuator project.

OEM / ODM

OEM & Bulk Support

Need the 500 mm stroke, a different voltage or a complete multi-column desk frame? Message us — custom orders are welcome.

Worldwide OEM/ODM, distributor, and project inquiries are welcome. Shipping availability and terms are confirmed for each destination.

Request a Quote Contact Us

OEM / ODM solutions

Support product customization for distributor programs and private-label project needs.

Volume pricing for distributors

Ask about volume pricing for recurring supply, project buying, and distributor orders.

Engineering support available

Get help with application fit, product selection, and system integration questions.

Request a Quote

Tell us about your project

Use this form to request a quote or project support.

Include model, application, force, stroke, voltage, and customization notes.